Search for: All records

Silicon/graphite (Si/Gr) nanocomposites with controlled void spaces and encapsulated by a carbon shell (Si/Gr@void@C) are synthesized by utilizing high-energy ball milling to reduce micron-sized particles to nanoscale, followed by carbonization of polydopamine (PODA) to form a carbon shell, and finally partial etching of the nanostructured Si core by NaOH solution at elevated temperatures. In particular, the effects of ball milling time and NaOH etching temperature on the electrochemical properties of Si/Gr@void@C are investigated. Increasing the ball milling time results in the improved specific capacity of Si-based anodes. Carbon coating further enhances the specific capacity and capacity retention over charge/discharge cycles. The best cycle stability is achieved after partial etching of the Si core inside Si/Gr@void@C particles at either 70 or 80 C, leading to little or no capacity decay over 130 cycles. However, it is found that both carbon coating and NaOH etching processes cause some surface oxidation of the nanostructured Si particles derived from high-energy ball milling. The surface oxidation of the nanostructured Si results in decreases in specific capacity and should be minimized in future studies. The mechanistic understanding developed in this study paves the way to further improve the electrochemical performance of Si/Gr@void@C nanocomposites in future. 

Utilizing silicon as an anode material for Li-ion batteries has been the subject of many studies. However, due to the huge volume change of silicon during lithiation, the electrochemical performance of silicon is poor. Here, we have investigated a novel yet simple approach to synthesize nanostructured silicon/graphite composites with a carbon coating and engineered voids. High-energy ball mill is employed to convert micrometer-sized silicon and graphite to nanostructured silicon/graphite composite building blocks, while a thin carbon coating is applied to encapsulate these composite agglomerates, followed by partial etching of silicon to create engineered voids inside the composite agglomerates. The batteries made with this tailored nanostructure exhibit improved electrochemical performance over the counterparts made with silicon nanoparticles and exhibited a specific capacity of ~1800 mA h g-1 discharge capacity at the first cycle, 580 mA h g-1 after 40 cycles, and 350 mA h g-1 after 300 cycles. This study has established a novel method scalable at industry environment and capable of producing low cost Si anodes and clearly shown that the cycle stability of the tailored nanostructure improves with increasing engineered voids in the range we have investigated.